Fluke 345 Single Phase Power Quality Clamp Meter

Description

ebay template
The Following Items Are Included:
Fluke 345 Power Quality Clamp Meter (BC# 40316)
(2) 1000V Hard Point Test Leads
(2) Alligator Clips
AC Adapter/Charger
USB PC Interface Cable
User Manual On CD-ROM
Carrying Case (G)
BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS!
This Item Has A Current Calibration!
Fluke 345 Single Phase Power Quality Clamp Meter
The Fluke 345 is ideal for measurements on switching loads such as variable frequency drives, electronic lighting and UPS systems
Clamp-on measurement of ac current up to 1400 A rms and dc current up to 2000 A without breaking the circuit
Includes Carrying Case & Accessories As Listed Above!
Working Condition: Excellent
Calibrated: Factory Calibration
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Fluke 345 Power Quality Clamp Meter
The ideal meter for commissioning and troubleshooting modern electrical loads
With a bright color display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 is ideal for measurements on switching loads such as variable frequency drives, electronic lighting and UPS systems. Additionally, the Hall Effect measurement system makes measurement of dc current possible without the need to break the circuit, and the internal memory enables long-term logging for analysis of trends or intermittent problems.
Log measured parameters
All voltage, current, power, and harmonic measurements can be logged for minutes, hours, or months. Measurement averaging periods from 1 second to 15 minutes can be selected depending on the application.
Measured parameters can be logged into three separate recording memory areas. If longer recordings are required, the three areas may be combined into one. Stored measurements can be recalled and displayed on-screen in normal screen format or downloaded using the Power Log software package.
Flexible and easy to use
The 345 measures a wide range of electrical parameters and can be used for many applications in today’s modern electrical environment. Measuring mode is selected by a simple turn of the rotary switch and the large color display presents data in a clear, easy-to-understand way.
By default the display will show the most common measurements, in very large format. If more detailed views are required they are available with the press of a single key (up to six measurements at once).
Inrush current
Diagnose equipment start-ups with the inrush current mode. A current trigger level is set prior to recording. Once the level has been exceeded, the meter will begin capture. Recordings from 3 seconds to 300 seconds may be captured, and up to 1000 inrush events may be stored in the instruments memory.
Screen captures and data logging
Any measurement can be stored in memory for later viewing, or downloaded to a PC. Simply press ‘SAVE’ to capture the active screen to memory – up to 50 screen shots can be saved for quick and simple documentation. Additionally, over 150,000 individual measurements can be logged for later review on the display or on a PC using Power Log software.
Features:
AC/DC current:
Clamp-on measurement of ac current up to 1400 A rms and dc current up to 2000 A without breaking the circuit
Highest safety rating:
600 V CAT IV rated for use at the service entrance
Accurate in noisy environments:
Even with distorted waveforms present on electronic loads with low-pass filter
Data logging:
Identify intermittent faults by logging any power parameters for minutes or months, including harmonics
Verify batteries:
Direct measurement of dc ripple (%) for battery and dc systems
Troubleshoot harmonics:
Analyze and log harmonics digitally or graphically
Inrush current:
Capture and analyze nuisance tripping, from 3 seconds to 300 seconds
Easy to use:
Easily confirm instrument setup with large backlit color display of waveforms and trends
3-Phase power:
Built in capability for balanced loads
View graphs and generate reports:
With Power Log software
Applications:
Set
up and troubleshoot variable frequency drives and UPS systems
Verify correct operation by measuring key parameters
Harmonics measurements
Uncover harmonic issues that can damage or disrupt critical equipment
Inrush capture
Check start-up current where spurious resets or nuisance circuit breaker tripping occurs
Load studies
Verify electrical system capacity before adding loads
Specifications:
Display
Color transmissive LCD 320 x 240 pixels (70 mm diagonal) with 2 level backlight
Power supply
Battery type 1.5 V Alkaline AA MN 1500 or IEC LR6 x 6
Battery life typically
> 10 hours (backlight on full)
> 12 hours (backlight reduced)
Battery Eliminator BE345
Input: 110 V/230 V, 50/60 Hz
Output: 15 V dc, 300 mA
Ambient conditions (For indoor use only)
Reference conditions
All accuracies stated at 23 °C ± 1 °C (73.4 °F ± 1.8 °F)
Operating temperature
0 °C to 50 °C (32 °F to 122 °F)
Temperature coefficient of current
≤ ± 0.15 % of rdg per °C
Temperature coefficient of voltage
≤ ± 0.15 % of rdg per °C
Maximum relative humidity
80 % for temperatures up to 31 °C (87 °F) decreasing linearly to 50 % relative humidity at 40 °C (104 °F)
Maximum operating altitude
2000 m
Electrical safety
Safety IEC 61010-1 600 V CAT IV, double or reinforced insulation, pollution degree 2
Protection IP40; EN60529
Maximum safe working voltages
Current measurement: 600 V ac rms or dc between uninsulated conductor and ground
Voltage measurement: 600 V ac rms or dc between either input terminal and ground, or 825 V between energized phase voltages (delta power config.)
EMC
Emission
IEC/EN 61326-1:1997 class B
Immunity
IEC/EN 61326-1:1997
Mechanical
Dimensions (length x width x depth)
300 mm x 98 mm x 52 mm (12 in x 3.75 in x 2 in)
Weight including batteries
820 g/1.8 lb
Jaw opening
60 mm
Jaw capacity
58 mm diameter
Cleaning
The unit can be cleaned with an Isopropanol impregnated cloth. Do not use abrasives or other solvents.
Electrical data
All accuracies stated at 23 °C ± 1 °C (73.4 °F ± 1.8 °F). See Ambient conditions specifications for temperature coefficients.
Current measurement
(dc, dc rms, ac rms)
Measuring range
0 to 2000 A dc or 1400 ac rms
Autorange facility
40 A/400 A/2000 A
Resolution
10 mA in 40 A range
100 mA in 400 A range
1 A in 2000 A range
Accuracy
DC and dc rms
I > 10 A: ± 1.5 % rdg ± 5 digits
I < 10 A: ± 0.2 A
AVG
I > 10 A: ± 3 % rdg ± 5 digits
I < 10 A: ± 0.5 A
Pk
I > 10 A: ± 5 % rdg ± 5 digits
I < 10 A: ± 0.5 A
AHr
I > 10 A: ± 2 % rdg ± 5 digits
I < 10 A: ± 0.5 AHr
CF (Crest Factor)
1.1 ≤ CF < 3: ± 3 % rdg ± 5 digits
3 ≤ CF < 5: ± 5 % rdg ± 5 digits
Resolution: 0.01
RPL (Ripple)
2 % ≤ RPL < 100 %: ± 3 % rdg ± 5 digits
100 % ≤ RPL < 600 %: ± 5 % rdg ± 5 digits
Resolution: 0.1 %
Idc > 5 A, Iac > 2 A
Voltage measurement
(dc, dc rms, ac rms)
Measuring range
0 to 825 V dc or ac rms
Autorange facility
4 V/40 V/400 V/750 V
Resolution
1 mV in 4 V range
10 mV in 40 V range
100 mV in 400 V range
1 V in 750 V range
Accuracy
DC and dc rms
V > 1 V: ± 1 % rdg ± 5 digits
V < 1 V: ± 0.02 V
AVG
V > 1 V: ± 3 % rdg ± 5 digits
V < 1 V: 0.03 V
Pk
V > 1 V: ± 5 % rdg ± 5 digits
V < 1 V: ± 0.03 V
CF (Crest Factor)
1.1 ≤ CF < 3: ± 3 % rdg ± 5 digits
3 ≤ CF < 5: ± 5 % rdg ± 5 digits
Resolution: 0.01
RPL (Ripple)
2 % ≤ RPL < 100 %: ± 3 % rdg ± 5 digits
100 % ≤ RPL < 600 %: ± 5 % rdg ± 5 digits
Resolution: 0.1 %
Vdc > 0.5 V, Vac > 0.2 V
Harmonics
THD (Total Harmonic Distortion)
1 % ≤ THD < 100 %: ± 3 % rdg ± 5 digits
100 % ≤ THD < 600 %: ± 5 % rdg ± 5 digits
Resolution: 0.1 %
DF (Distortion Factor)
1 % ≤ DF < 100 %: ± 3 % rdg ± 5 digits
Resolution: 0.1 %
H02 ≤ Vharm < H13: ± 5 % rdg ± 2 digits
H13 ≤ Vharm ≤ H30: ± 10 % rdg ± 2 digits
Watts measurement (single- and three-phase)
(dc, dc rms, ac rms)
Measuring range
0 to 1650 kW dc or 1200 kW ac
Autoranging facility
4 kW, 40 kW, 400 kW, 1650 kW ac
Resolution
1 W in 4 kW
10 W in 40 kW
100 W in 400 kW
1 kW in 1200 kW
Accuracy
2.5 % rdg ± 5 digits
W1Ø < 2 kW ± 0.08 kW
W3Ø < 4 kW ± 0.25 kW
VA measurement (single- and three-phase)
(dc, dc rms, ac rms)
Measuring range
0 to 1650 kVA dc or 1200 kVA ac
Autorange facility
4 kVA, 40 kVA, 400 kVA, 1650 kVA
Resolution
1 VA in 4 kVA
10 VA in 40 kVA
100 VA in 400 kVA
1 kVA in 1200 kVA
Accuracy
VA > 2 kVA
2.5 % rdg ± 5 digits
VA < 2 kVA
± 0.08 kVA
VAR measurement (single- and three-phase)
Measuring range
0 to 1250 kVAR
Autorange facility
4 kVAR, 40 kVAR, 400 kVAR, 1200 kVAR
Resolution
1 VAR in 4 kVAR
10 VAR in 40 kVAR
100 VAR in 400 kVAR
1 kVAR in 1200 kVAR
Accuracy
VAR > 4 kVAR
± 2.5 % rdg ± 5 digits
VAR < 4 kVAR
± 0.25 kVAR
Power factor range
0.3 < PF < 0.99
Power factor (single- and three-phase)
Measuring range
0.3 capacitive and 1.0 to 0.3 inductive (72.5° capacitive and 0° to 72.5° inductive)
Resolution
0.001
Accuracy
± 3°
Frequency range
15 Hz to 1 kHz
Displacement power factor
Measuring range
0.3 capacitive and 1.0 to 0.3 inductive (72.5° capacitive and 0° to 72.5° inductive)
Resolution
0.001
Accuracy
± 3°
Frequency range
15 Hz to 22 Hz and 45 Hz to 65 Hz
Kilowatt hour (kWHr)
Measuring range
40,000 kWHr
Autorange facility
1 kWHr, 40 kWHr, 400 kWHr, 4,000 kWHr, 40,000 kWHr
Resolution
1 WHr in 4 kWHr
10 WHr in 40 kWHr
100 WHr in 400 kWHr
1 kWHr in 4,000 kWHr
10 kWHr in 40,000 kWHr
Accuracy
kWHr > 2 kWHr
± 3 % ± 5 digits
kWHr < 2 kWHr
± 0.08 kWHr
All Watts /VA /VAR /PF measurements
Frequency range
DC and 15 Hz to 1 kHz
Current range
10 A to 1400 A rms
Voltage range
1 V to 825 V rms
Maximum input
825 V rms/1400 A rms
Maximum overload
1000 V rms/10,000 A
Frequency measurement
(from current or voltage sources)
Measuring range
15 Hz to 1 kHz
Resolution
0.1 Hz
Accuracy
15 to 22 Hz ± 0.5 % rdg
40 Hz to 70 Hz ± 0.5 % rdg
15 Hz to 1000 Hz ± 1% rdg
Current range
10 A to 1400 A rms
Voltage range
1 V to 825 V rms
Scope function
Current measurement
Ranges
10 A/20 A/40 A/100 A/200 A/400 A/1000 A/2000 A
Resolution
1 A in 40 A
10 A in 400 A
50 A in 2000 A
Accuracy
± 3 % rdg ± 1 pixel
Maximum overload
10,000 A
Voltage measurement
Ranges
4 V/10 V/20 V/40 V/100 V/200 V/400 V/1000 V
Resolution
100 mV in 4 V
1 V in 40 V
10 V in 400
V 31.25 V in 1000 V
Accuracy
± 2 % rdg ± 1 pixel
Maximum overload
1000 V rms
Frequency range
DC and 15 Hz to 600 Hz
Time base
2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms/div
Refresh rate
0.5 seconds
Maximum sampling rate
15.625 kHz
Inrush current function
Ranges
40 A, 400 A, and 2000 A
Resolution
10 mA in 40 A range
100 mA in 400 A range
1 A in 2000 A range
Accuracy
I > 10 A
± 5 % rdg ± 1 pixel
I < 10 A
± 0.5 A
Maximum overload
Maximum overload 10,000 A or rms x frequency < 400,000
Capture time
1 s, 3 s, 10 s, 30 s, 100 s, and 300 s
Maximum sampling rate
15.625 kHz
Interface
USB Interface to a PC
Power Log software for download, analysis, and reporting
345 Upgrade Utility for installing a new firmware version
Logging Memory
Logging areas
Three areas that can be used individually or combined into one large area
Averaging periods
1 s, 2 s, 5 s, 10 s, 30 s, 1 min, 5 min, 10 min, 15 min, and custom
Logging times
Volts and current mode
Average time
Logging time (1 area)
Logging time (3 areas)
1 s
1 h 49 m
5 h 12 m
2 s
3 h 38 m
10 h 24 m
5 s
9 h 06 m
1 d 2 h 00 m
10 s
18 h 12 m
2 d 04 h 00 m
30 s
2 d 06 h 36 m
6 d 12 h 01 m
1 min
4 d 13 h 12 m
13 d 00 h 03 m
5 min
22 d 18 h 00 m
65 d 00 h 15 m
10 min
45 d 12 h 00 m
130 d 00 h 30 m
15 min
68 d 06 h 00 m
195 d 00 h 45 m
V & A harmonics mode
Average time
Logging time (1 area)
Logging time (3 areas)
1 s
0 h 34 m
1 h 38 m
2 s
1 h 08 m
3 h 16 m
5 s
2 h 52 m
08 h 11 m
10 s
5 h 44 m
16 h 23 m
30 s
17 h 13 m
2 d 01 h 11 m
1 min
1 d 10 h 26 m
4 d 02 h 23 m
5 min
7 d 04 h 10 m
20 d 11 h 25 m
10 min
14 d 08 h 20 m
81 d 0 h 50 m
15 min
21 d 12 h 30 m
121 d 13 h 15 m
single- and three-phase power mode
Average Time
Logging Time (1 area)
Logging Time (3 areas)
1 s
1 h 40 m
4 h 47 m
2 s
3 h 21 m
9 h 34 m
5 s
8 h 22 m
23 h 57 m
10 s
16 h 45 m
1 d 23 h 54 m
30 s
2 d 02 h 17 m
5 d 23 h 42 m
1 min
4 d 04 h 35 m
11 d 23 h 25 m
5 min
20 d 22 h 55 m
59 d 21 h 05 m
10 min
41 d 21 h 50 m
119 d 18 h 10 m
15 min
62 d 20 h 45 m
179 d 15 h 15 m
For full Fluke 345 product specifications, please click here:
Fluke 345
Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our
Ebay Test Equipment Store
. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to
contact us
for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet.
Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more!
We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you!
We Ship World Wide!
We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".
Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.
We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities.
We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed.
Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale.
Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections)
A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment.
Thank you
ALL MAJOR CREDIT CARDS & PayPal ACCEPTED
Sell Smarter with
Kyozou
.
Inventory and Ecommerce Management